Greenheck HBS Series (474916) - Manual

Document Number 474916
HBS SERIES
Installation, Operation, and Maintenance Instructions
This manual is the property of the owner, and is required for future maintenance. Please leave it with the owner when the
job is complete.
SAFETY WARNING:
Improper installation, adjustment, alteration,
service or maintenance can cause property
damage, injury or death. Read the installation,
operating, and maintenance instructions
thoroughly before installing or servicing this
equipment.
Due to continuing research, Greenheck reserves the right to change specifications without notice.
RECEIVING AND HANDLING
Upon receiving dampers, check for both obvious and
hidden damage. If damage is found, record all necessary
information on the bill of lading and file a claim with
the final carrier. Check to be sure that all parts of the
shipment, including accessories, are accounted for.
Dampers must be kept dry and clean. Indoor storage
and protection from dirt, dust and the weather is highly
recommended. Do not store at temperatures in excess of
100°F (37ºC).
Blast
Flow
HBS-330/430 HBS-331/431
Blast
Flow
Storage of Dampers Prior to Installation
The basic intent of proper storage of heavy duty/industrial blast damper is to prevent physical damage, material corrosion,
and deterioration of organic material.
1) Visually inspect the damper for damage. Store indoors, protected from sunlight, moisture and flooding. Protect dampers
from debris and dirt accumulation.
2) Dampers may be stacked and stored horizontally if wood or equivalent spacers are placed between flanges to protect
finish. Do NOT store with axles vertical. Place dampers on pallets or supports to allow air circulation. Do NOT store with
damper directly on concrete or ground.
3) Consult manufacturer if storage time exceeds two years.
®