Greenheck Latch Release Tool for Fire Dampers (459019) User Manual
Greenheck Equipment
Document Number 459019
Latch Release Tool Instructions
for Fire Dampers
1. Insert tool as shown, near the end of the blade.
Push the tool against the blade and rotate.
2. To disengage the blade from the blade latch, pull
the tool until the blade is out of the latch.
3. While holding the released end of the blade out of
the blade latch. Repeat the process on the other end
of the blade until its released.
®
459019• Latch Releae Tool Rev. 1, June 2013
Copyright 2013 © Greenheck Fan Corporation
As a result of our commitment to continuous improvement, Greenheck reserves the right to change
specifications without notice.
Specific Greenheck product warranties are located on greenheck.com within the product area tabs and in
the Library under Warranties.
®
Phone: (715) 359-6171 • Fax: (715) 355-2399 • E-mail: [email protected] • Website: www.greenheck.com
Our Commitment