Greenheck LSF (458066) - Manual (Page 7)

7 Model LSF Assembly
®
Step 15
Install Tinnerman clips in the slots preprunched at
the top of the base panels.
Step 16
Set one (1) section of the end louver assemblies
(without a cover) in place on an end base panel
(panels with lifting lugs). Fasten posts on louver
assemblies with 5/16 inch-18x1 inch thread
cutting screws, using the prepunched holes in the
posts and Tinnerman clips already installed in the
base panels. Repeat Step 16 for opposite louver
end assembly.
LSF Sizes 24–30 continue on page 8
LSF Sizes 33–36 continue on page 10 STOP