Guralp Systems CMG-SAM - Manual (Page 11)

Operator’s Guide CMG SAM & CMG CRM
4) From the next pop-up menu select Auto-Detect and a further pop-up window,
shown below, will appear.
EXPLANATION The SAM at this moment is not powered. When it is plugged
in it will send out a ‘Status’ message. It is this we shall use to detect the output
baud rate.
5) Plug the power supply into the SAM and the window will change to that shown
below, indicating that it is reading data.
6) The baud rate detected between the SAM and your PC will appear here.
Click OK to return to the start-up window.
Issue D March 2001 9