Guralp Systems CMG-SAM - Manual (Page 16)

Operator’s Guide CMG SAM & CMG CRM
2.6 FLASH MEMORY UPGRADE
For the later models with Flash memory it is possible for the user to upgrade the SAM
or CRM software.
Guralp systems have a mailing list to keep Scream users up to date. To subscribe, send
an email to [email protected] with a single line in the body containing "subscribe
screamusers" (without the quotes). This will keep the users informed of latest upgrades
available.
To find out what the users current software version is, either double click on the SAM
icon in the main Start-up window and the Configuration Setup window will open up,
or right click on the icon and select Configure from the pop-up menu for the same
Configuration Setup window. The picture below shows “Software revision v.050”.
First obtain the latest software, then proceed as the following instructions.
1) In SCREAM’s main startup window, right click on the SAM icon and select
Terminal from the pop-up menu. This will open as shown
Issue D March 2001 14