Guralp Systems CMG-SAM - Manual (Page 17)

Operator’s Guide CMG SAM & CMG CRM
2) If the user presses the Enter key “ok” will appear on a new line, signifying that
there is two-way communication with the SAM.
3) Re-boot the SAM by turning the power off then on again and the initial boot-up
information will be displayed similar to that shown in the picture below.
4) In the instance shown above, the user then has 31 seconds to type “h8upload”
then press enter. After the next message “Ready to upload” appears, as shown
below, right click anywhere on the terminal window and select send file from
the pop-up menu.
Issue D March 2001 15