Harken 7311.10 Cruising Jib Reefing & Furling - Manual (Page 15)

Assembly Assemble Connector/Assemble Foil/Slide on Halyard Swivel
Place connector over plastic isolator
so tabs on isolator are to side.
Put red Loctite ® in screw holes and
assemble. Continue with rest of foils.
Make sure bottom foil with feeder gap
will be at bottom.
Slide halyard swivel onto foils so swivel
portion is towards top of stay.
Tip: Taller “half” will be facing up.
Slide drum assembly onto foils.
Red
Loctite ®
7/01/08 Unit 1, 2 Cruising 15