Harken 7311.10 Cruising Jib Reefing & Furling User Manual
Page 6
ALL UNITS
Harken Toggle (Sold Separately)
1. Harken toggle assembly required. Sold separately.
2. Mating turnbuckle components must be purchased separately.
3. Headstay may require cutting and shortening to fit Harken
toggle. Headstay may remain uncut by replacing lower stud
of turnbuckle with stud/eye thus eliminating extra toggle.
4. Rod rigging requires Harken rod adapter stud.
5. Order Harken 7404 Lead Block Kit and one additional 7403 if necessary. Fits 1" (25 mm) stanchions.
Preassembly
Rigging Parts Check/Tools
Tools You Will Need
Includes 3 x 7403; 1 x 7401;
1 x 7402; 1 Horn Cleat
7404 Lead Block Kit
(Sold Separately)
1. Long tape measure
6. Side cutters
11. Center punch
2. Short tape measure
7. Rat-tail file
12. Rigging or black tape
3. Drill bit – 1/8" (3 mm)
8. Allen wrenches (provided)
13. Hammer
4. Power drill
9. Phillips screwdriver
5. Hacksaw
10. Needle-nose pliers
12
5
7
10
11
8
4
2
1
9
6
3
13
ROD RIGGING
Harken Rod Adapter
Stud Required
(Sold Separately)
Unit
Part No.
Thread Ø
1
7422 -8
1
/
2
" - 20RH
7423 -10
1
/
2
" - 20RH
1 & 2
7424 -12
5
/
8
" - 18RH
2
7425 -17
5
/
8
" - 18RH
7426 -22
3
/
4
" - 16RH
Rod Adapter Stud
Unit
Part No.
1
7311.21 1/2
7311.21 5/8
2
7312.21 5/8
7312.21 3/4*
Long Link
Plate w/Toggle
Unit
Part No.
Thread Ø
1
7311.20 5/8
5
/
8
" - 18LH
2
7312.20 3/4*
3
/
4
" - 16LH
Stud/Jaw Toggle
Unit
Part No.
1
7411.20 1/2
2
7412.20 5/8
Eye/Jaw Toggle
Unit
Part No.
1
7311.20 1/2
2
7312.20 5/8
Jaw/Jaw Toggle
*Includes 9 H-41009 large bore connector isolators
for use with 7/16", 11 mm or 12 mm wire.
** Requires drum assembly with four threaded holes
in base. See page 16.
6
Unit 1, 2 Cruising
10/19/10
WARNING! Headstay condition should be
checked by a professional rigger before
reusing. Wire that is old or damaged
may break suddenly causing an accident,
damage to your vessel, personal injury,
or death. See www.harken.com for
additional safety information.