Harken 7311.10 Cruising Jib Reefing & Furling - Manual (Page 2)

1
2
3
4
5
6
1) Toggle Assembly
2) Crosspin
3) Shackle
4) Drum Assembly 5) Foil Clamp Screws
6) 2' (610 mm) Bottom Foil
7) Connector Isolator
8) Connector 9) 7' (2.13 m) Foil
10) Connector Screws
11) Halyard Swivel
12) Trim Cap 13) Trim Cap Screws
Parts Descriptions
Table of Contents
Preassembly
Parts 4–5
Tools 6
Dimensions/Sailmaker's Instructions 7
Toggle Deductions, Stay Into Foil Options 8
Top Foil Length Worksheet—Unit 1 9
Top Foil Length Worksheet—Unit 2 10
Short Top Foil 11
Foil Length 12
Assembly
Foils/Connectors 13–15
Halyard Swivel 13
Drum Assembly 13
Rod Rigging 14
Adjust Turnbuckle 17
Toggle 17–18
Final 17–18
Commissioning
Turnbuckle 20
Line to Cockpit 21
Halyard Swivel Height/Angle 22–23
Halyard Restrainer/Tension 21
Operation
Halyard/Headstay Tension 24
Raise Sails 25
Furl/Reef 23–24
Secure Sail 26
Maintenance
Clean 27
Inspect 27
Replace Line 27
Storage 27
Remove Furler 27
Troubleshooting
Warranty
Parts
7
2 Unit 1, 2 Cruising 08/23/10