Hypertherm PCBS-0124 - Manual (Page 47)

Award BIOS Setup
43
3.5 Advanced BIOS Features
This section allows you to configure your system for basic operation.
You have the opportunity to select the system’s default speed, boot-up
sequence, keyboard operation, shadowing and security.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Virus Warning
CPU L1 & L2 Cache
Quick Power On Self Test
APIC Mode
HDD S.M.A.R.T. Capability
¾ Boot Seq. & Floppy Setup
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
X Typematic Rate (Chars/Sec)
X Typematic Delay (Msec)
Security Option
OS Select For DRAM > 64MB
Disabled
Enabled
Enabled
Disabled
Disabled
Press Enter
On
Fast
Disabled
6
250
Setup
Non-OS2
Item Help
____________________________
Menu Level
¾
Allow you to choose the VIRUS
warning feature for IDE Hard Disk
boot sector protection. If this
function is enabled and someone
attempt to write data into this area,
BIOS will show a warning message
on screen and alarm beep
↑↓←→Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-safe defaults F7: Optimized Defaults
Virus Warning:
Allow you to choose the VIRUS Warning feature for IDE Hard Disk boot
sector protection. If this function is enabled and someone attempt to write
data into this area, BIOS will show a warning message on screen and alarm
beep.
Enabled---Activates
automatically when the system boots up causing a
warning message to appear when anything attempts to
access the boot sector or hard disk partition table.
Disabled---No warning message will appear when anything attempts to
access the boot sector or hard disk partition table.
CPU L1 & L2 Cache:
These two categories speed up memory access. However, it depends on
CPU/chipset design.
Enabled---Enable cache
Disabled---Disable cache