Hypertherm PCBS-0124 - Manual (Page 48)

Award BIOS Setup
44
Quick Power On Self Test:
This category speeds up Power On Self Test (POST) after you power up the
computer. If it is set to Enable, BIOS will shorten or skip some check items
during POST.
Enabled---Enable quick POST
Disabled--- Normal POST
APIC Mode:
This item allows you to enable/disable APIC Mode.
The choice: Enabled, Disabled.
HDD S.M.A.R.T Capability:
Enabled SMART hard driver functions for compatible. The default is
disabled.
The choice: Enabled, Disabled.
Boot Seq. & Floppy Setup:
Phoenix - AwardBIOS CMOS Setup Utility
Boot Seq. & Floppy Setup
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Drive
Boot Up Floppy Seek
Report NO FDD For Win 95
Floppy
HDD-0
SCSI
Enabled
Disabled
Enabled
No
Item Help
____________________________
Menu Level
¾
Select your Boot Device Priority
↑↓←→Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-safe defaults F7: Optimized Defaults
First/Second/Third Boot Device:
The BIOS attempts to load the operating system from the devices in the
sequence selected in these items.
The Choice: Floppy, LS/ZIP, HDD, SCSI, CDROM, LAN and Disabled.
Boot Other Device:
When enabled, the system searches all other possible locations for an
operating system if it fails to find one in the devices specified under the first,
second, and third boot devices.
The Choice: Enabled, Disabled