Hypertherm LR2075 - Manual (Page 38)

OPERATION
LR 2075 Laser Head Instruction Manual 4-13
Center screw
Side screw
Lens centering
Note: Do not use Hypertherm’s FAST Laser nozzles for lens centering. Use standard nozzles found in
the Parts list.
Adjustment screws are on lens doors. The part number for the adjustment screw wrench is 027982.
Center screw adjusts front (CCW turn) to back (CW turn).
Side screw adjusts left (CW turn) to right (CCW turn)
Total adjustment range +/- 1.5 mm.
Caution: Do not over tighten adjustment screws to avoid damage to the
door latch.