Hypertherm LH2100 - Manual (Page 42)

1
OPERATION
LH2125/LH2100 Laser Head Instruction Manual 4-15
Center screw
Side screw
Pre-mounted See Parts List for replacement part numbes
Check lens for cleanliness and insert into lens chamber.
Lens centering
Note: Do not use Hypertherm’s FAST Laser nozzles for lens centering. Use standard nozzles found in
the parts list.
Adjustment screws are on lens doors.
Center screw adjusts front (CCW turn) to back (CW turn).
Side screw adjusts left (CW turn) to right (CCW turn)
Total adjustment range +/-2.5 mm.