IBASE IB113 User Manual
Page 29
Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
29
IBASE Technology Inc.
SW1
Boot From
10101010
SD
01100110
EMMC
--- Boot Up with IB113---
Please double check the Boot device selection before powering on.
(IB113, by default, is set to boot up from eMMC.)
1. Insert the SD card/MicroSD into the motherboard. Make sure the HDMI is
connected and connect the power supply to boot up the system.
2. Recovery program on your SD card will execute automatically. The eMMC on
PCB will be formatted and the OS will be installed while the progress bar
shows 100% complete.
3. Remove the power and the recovery SD. Remember to change the boot up
device to EMMC by SW1.
4. Connect the power and boot up the IB113, you will see the Linux/ Android
boot up pages.