Booting with your sd card – IBASE IB113 User Manual
Page 38
Advertising
38
IB113
4.1.7. Booting with your SD card
(For advance software users only)
Put SD card in your board and insert special COM port dongle to boot from SD. Connect a debug
cable to debug port with serial port 115200/N/8/1 setting on your PC’s serial port program such
hyperterminal/teraterm. Connect HDMI monitor. Power on and you will see u-boot prompt.
If you want change to other monitor (or display panel) type, please reference section 3.2.2 to
setting video output command for want.
After that, prepare your LCD, power off and power on again.
You can see Ubuntu Linux is running on monitor.
Advertising