Inova Labs XYC100B-SPT User Manual

Page 12

Advertising
background image

2. AC Adapter/Charger: An AC Adapter/Charger allows the POC to be powered

from a standard 100-240 VAC, 50/60 Hz
outlet. When the unit is operated from an AC
Adapter/Charger, power from the AC outlet
powers the unit and recharges the internal
and/or External Battery. (See Battery
Charging section for details.)

NOTE:

Using an AC Adapter/Charger that is not specified by Inova Labs

with the POC may damage the unit and will void all warranties.

3. DC Adapter/Charger: A DC Adapter/Charger can be connected from

the POC unit to a vehicle’s (car, boat, motor
home, etc.) standard 12 VDC outlet. When
the system is connected to the DC outlet,
power from the vehicle battery powers the
POC unit and recharges the Internal and/
or External Battery. (See Battery Charging
section for details.)

NOTE: The 12 VDC outlets in some vehicles will not provide sufficient

current to operate the POC and charge the battery at the same time.
Verify that a DC outlet can provide at least 10 amps at 12 VDC. Car
auxiliary power varies significantly; therefore, the rate of charging will
vary. It is recommended that the vehicle be turned on before plugging
the DC Adapter/Charger into the POC.

4. External Battery: To power the POC from an external battery, connect

the External Battery to the External Battery
Port. A fully charged external battery will
supply power to the POC for up to three
hours. (Reference Battery Life Timetable
as battery life will vary depending upon
model, breath rate and Pulse Setting.)

When the POC is being powered from the
External Battery, the Battery Check LED
labeled “EXT” will be slowly flashing.
Pushing the Battery Check Button will
display the charge level of the External
Battery.

INTERNAL BATTERY CHARGING

1. Connect the unit to either an AC or DC Adapter and corresponding

charger to a suitable outlet.

2. With the unit powered off, verify that the INT Battery Check LED is solid

green and the Power LED is flashing green. This indicates that an external
power source is recognized and the battery is charging.

10

OPERATING

INSTRUCTIONS

continued

Advertising
This manual is related to the following products: