Inova Labs XYC100B-SPT - Manual (Page 13)

11
3. It can take a fully discharged
Internal Battery up to 4.5 hours
with the Pro Model or 3 hours with
the Sport Model to reach a 100
percent charge level. Press the
Battery Check button to check the
charging process.
4. When the Internal Battery is fully
charged, the INT Battery Check LED
will turn off.
NOTE: The charge indicator will show 4 solid green lights when the
battery has a charge level of 96 percent or more. When the battery
reaches a full 100 percent charge, the INT LED will turn off.
5. It is recommended to recharge the Internal Battery, even if only
partially depleted as often as possible. The Internal Battery cannot
be overcharged, so it is okay to leave it plugged in via an AC or DC
Adapter/Charger continuously.
EXTERNAL BATTERY CHARGING
1. Connect the External Battery to the External Battery Port on the
POC. Then connect the unit to either an AC or DC Adapter and
corresponding charger to a suitable outlet. To prolong battery life
and maintain communication with the POC, it is recommended to
charge the External Battery when you charge the POC’s Internal
Battery.
2. Verify that the Battery Check LED labeled “EXT” is solid green and
the Power LED is flashing green.
This indicates that an external power
source is recognized and the battery
is charging.
NOTE: By design, the Internal
Battery will charge first. That means
that the External Battery will not start
charging until the Internal Battery is
fully charged. Use the INT and EXT
Battery Check LEDs to determine
which batteries are charging.
OPERATING
INSTRUCTIONS
continued