Inova Labs XYC100B-SPT User Manual
Page 17
15
5. Select a Pulse Setting of 1, 2, or 3 as prescribed by your doctor.
The device utilizes PULSE-WAVE
®
Delivery which delivers oxygen
congruent with your inhalation rate. Because this type of delivery
is very gentle, you may not feel the pulse of oxygen. To verify that
oxygen is being delivered, reference the LED above your selected
Pulse Setting. This LED will flash every time a breath is detected and
a bolus of oxygen is delivered.
6. Place the nasal cannula in the nasal passages and breathe normally.
When the POC senses inhalation, oxygen is supplied through the
cannula. The duration and size of the pulse is dependent upon the
Pulse Setting selected.
7. Check to make sure your unit’s
battery is fully charged before
venturing out with the POC for
the first time. (See Battery Charge
Indicator section, User Controls).
8. To turn the POC off, press the
Power Button and hold for 2
seconds until the green Power LED
goes off and the unit shuts down.
After the POC is powered off, the
internal fans may continue to
operate for an additional period of
time until the temperature inside the
unit is sufficiently cooled.