Ivoclar Vivadent IPS Empress CAD Labside - Manual (Page 2)

Pr
oduct Information
2
Table of Contents
General
Information
Practical
W
orking Steps
Fabrication of the IPS Empr
ess CAD Restorations
IPS Empress CAD – Product Information 4
Material
Uses
Composition
Block concept
Product overview and description
Accessories and equipment
IPS Empress CAD – Practical Working Steps 17
Preparation guidelines and minimum thicknesses
Shade determination
Cementation
IPS Empress CAD – Inlays / Onlays – stained / glazed 22
Finishing and preparing for the stain and glaze firing
2-in-1 technique and staining and glaze firing in one step
Corrective firing
IPS Empress CAD – Veneers / Anterior Crowns – stained / glazed 25
Finishing
Preparing for staining
Stain and characterization firing
Glaze firing
Corrective firing
IPS Empress CAD – Veneers / Anterior Crowns – Cut-back and layered 30
Cut-back technique
Preparing for veneering
Wash firing
Incisal / Transparent firing
Finishing and preparing for stain and glaze firing
Stain and glaze firing
Corrective firing
IPS Empress CAD – General Information 38
Preparing for cementation
Firing parameters
Combination table