Ivoclar Vivadent IPS Empress CAD Labside - Manual (Page 23)

23
Step 2 – Application of Shades / Stains
– Extrude IPS Empress Universal Shade or Stains from the syringe and mix thoroughly.
– Thin the material to the desired consistency using IPS Empress Universal Glaze and Stain Liquid.
– Apply the mixed Shade material directly into the unfired glazing material layer.
– Intensify the corresponding dentin shade in the cervical and occlusal areas using IPS Empress Universal Shades.
– To imitate the incisal area and translucency in the incisal third, use IPS Empress Universal Shade Incisal.
– Apply individualized effects and characterizations on cusps and in fissures using the Stains materials. Only apply the
Stains once staining with the Shade materials has been completed.
– Apply the Stains thinly and in a controlled manner on the unfired glazing material layer using a brush.
Apply the mixed Shade material directly into the unfired glazing material layer.
Intensify the corresponding dentin shade in the cervical and occlusal areas and imitate the incisal area using Shade Incisal.
Apply individualized effects and characterizations on cusps and in fissures using the Stains
materials.
Evenly apply the glazing material on the entire outer surfaces of the restoration.