Ivoclar Vivadent IPS e.max Ceram User Manual
Page 22
Advertising
22
Before firing, carefully remove the framework with the applied and dried shoulder material
from the die and fire.
Ceramic shoulder after firing. Compensate for the sinter shrinkage with the
2
nd
Margin firing.
Firing parameters for the 1
st
Margin firing (note the temperature control)
Important: IPS e.max Ceram Margin materials are only suitable for the application on IPS e.max ZirCAD and other
zirconium oxide frameworks and must not be used in conjunction with glass-ceramic materials.
IPS e.max Ceram on ZrO
2
B
S
t
➚
T
H
V
1
V
2
°C/°F
min
°C/°F/min
°C/°F
min
°C/°F
°C/°F
1
st
Margin firing
403/
4:00
40/
800/
1:00
450/
799/
757
72
1472
842
1470
Advertising