Ivoclar Vivadent IPS e.max Ceram - Manual (Page 31)

31
Apply Glaze material in an even layer on the entire restoration. Basal area and the pontic should be given particular attention.
Characterize the fissures with Essence and supplement the contact points with a 1:1 mixture.
Completely stained, glazed and adjusted restoration ready to be fired. Polish the supplemented areas to a high gloss using silicone polishers.
Firing parameters for the Stain and Glaze firing – note the slow cooling!
Pr
ocessing
on
ZrO
2
Frameworks
IPS e.max Ceram on ZrO2 B S t ➚ T H V 1 V 2 L
°C/°F min °C/°F/min °C/°F min °C/°F °C/°F °C/°F
Stain firing 403/757 6:00 60/108 725/1337 1:00 450/842 724/1335 450/842
Glaze firing 403/757 6:00 60/108 725/1337 1:00 450/842 724/1335 450/842