Ivoclar Vivadent Vectris - Manual (Page 35)

35
SINGLE
CROWNS
Removing the framework from the die
After completion of the vacuum-forming process, first remove the Vectris foil or Transil matrix from the framework and
then carefully remove the framework from the die while it is still warm. If the restoration is removed at a later stage, it is
advisable to warm up the stone die by means of water vapor. The framework exhibits an even layer thickness after it has
been removed from the die.
Upon completion of the vacuum-forming process, remove the Vectris foil or
Transil matrix from the framework.
Excellent adaptation of the occlusal surface
Version A
Flat occlusal preparation
Version B
Deep occlusal preparation