7 brief compare – Kanguru 4HD SATA User Manual

Page 19

Advertising
background image

19

3.1.7 Brief Compare

The Brief Compare function only compares the sectors with information and skips the blank sectors

to assure that all of the Target drives have the same information as the Master drive. Brief Compare

can be used in conjunction with the Brief Copy function.

Note: Compare functions can only be used when the UDMA transfer mode is disabled. To disable

the UDMA you have to enter the CONFIGURATION mode, select TRAN MODE and then define

the Transfer Mode as “UDMA0”. For more information on Transfer Mode, please see section 3.4.2

Tran Mode, p.35.

COPY

DIAGNOSTIC

TOOL

->

<- Back UP/DN Sel ->

[ ] RATIO COPY

[ ] DISK COMPARE

[ ] BRIEF COMPARE

->

<- Back UP/DN Sel ->

X

[COPY]

BRIEF COMPARE

Run by ‘>’

1. Leave all drives in place after a Brief Copy session has

completed.

2. From the Setup Menu, press the UP or DOWN buttons to

navigate to COPY mode. Press the RIGHT button to enter

COPY mode.

3. From the COPY Function Menu, press the UP or DOWN

buttons to navigate to the BRIEF COMPARE function. Press

the RIGHT button to select BRIEF COMPARE.

4. Press the LEFT arrow twice to return to the Main Menu.

5. Press the RIGHT button to begin the Brief Compare.

6. Once the KanguruClone has finished comparing, it will

display a “V” for verified target drives or an “X” for failed

drives.

Brief Compare

Advertising
This manual is related to the following products: