Kanguru 4HD SATA - Manual (Page 23)

23
3.2.2 Seq. Seek
The Sequential Seek function checks the hard drives in a sequential pattern to check if there are any
bad sectors in the hard drives.
Seruential Seek checks all sectors in sequence, unlike Random Seek which checks sectors at
random.
COPY
DIAGNOSTIC
TOOL
->
<- Back UP/DN Sel ->
[ ] RANDOM SEEK
[ ] SEQ. SEEK
[ ] WRITE PATTERN
->
<- Back UP/DN Sel ->
X
[DIAGNOSTIC]
SEQ. SEEK
Run by ‘>’
1. From the Setup Menu, press the UP or DOWN buttons to
navigate to DIAGNOSTIC mode. Press the RIGHT button
to enter DIAGNOSTIC mode.
2. From the DIAGNOSTIC Function Menu, press the UP or
DOWN buttons to navigate to the SEQ. SEEK function.
Press the RIGHT button to select SEQ. SEEK.
3. Press the LEFT arrow twice to return to the Main Menu.
4. Press the RIGHT button to begin the Sequential Seek.
5. Once the KanguruClone has finished the sequential seek, it
will display a “V” for verified target drives or an “X” for
failed drives.
Seq. Seek