Kanguru 4HD SATA - Manual (Page 51)

51
3.4.17 Load Default
The Load Default function will reset all functions to the default setup, returning the KanguruClone
to the original factory settings.
DIAGNOSTIC
TOOL
CONFIGURATION ->
<- Back UP/DN Sel ->
Btn. Snd: ENABLE
HD Info
Load Default ->
<- Back UP/DN Sel ->
Running... Finished
<- Back
1. From the Setup Menu, press the UP or DOWN buttons to
navigate to CONFIGURATION mode. Press the RIGHT
button to enter CONFIGURATION mode.
2. From the CONFIGURATION Function Menu, press the UP or
DOWN buttons to navigate to the LOAD DEFAULT function.
Press the RIGHT button to select LOAD DEFAULT.
3. All settings will be returned to their default settings and then
“Running... Finished” will appear on the LCD screen.
Note: It is strongly recommended to load the default settings after updating the firmware. For
information on updating the firmware version, please see section 3.4.18 Update Version, p.52.
Load Default