Kemppi SF 52W - Manual (Page 13)

11
© Kemppi Oy / 1515
EN
Activation through SETUP
Other additional MIG functions are activated through SETUP.
• Creep Start is meant to facilitate the initial weld – e.g., when welding with a high wire
feed speed. The wire feed speed is kept low until the wire touches the work piece and
the current begins to flow. Creep Start can be selected with normal MIG welding or with
Synergic 1-MIG welding.
• WiseFusion™ is a welding function for ensuring consistent weld quality in all positions.
It is an optional feature, which can be purchased through Kemppi DataStore.
• MatchLog™ contains MiniLog™ function for quickly changing welding parameters on
the run. It is an optional feature, which can be purchased through Kemppi DataStore.
• If your welding needs change and you wish to update your system in the future, you can
order additional welding programs or other welding software and load them to your
system with Kemppi DataGun field programming device.
For further information about the available welding programs, modified processes and special
enhanced arc performance solutions, visit Kemppi web site at www.kemppi.com or contact
the local Kemppi dealer.
2.5 FastMig welding programs
1-MIG (Standard welding programs)
Fe group Wire (mm) Material Shielding gas
101 0.8 Fe Ar+18%-25%CO₂
102 0.9 Fe Ar+18%-25%CO₂
103 1.0 Fe Ar+18%-25%CO₂
104 1.2 Fe Ar+18%-25%CO₂
106 1.6 Fe Ar+18%-25%CO₂
111 0.8 Fe CO₂
112 0.9 Fe CO₂
113 1.0 Fe CO₂
114 1.2 Fe CO₂
116 1.6 Fe CO₂
121 0.8 Fe Ar+8%CO₂
122 0.9 Fe Ar+8%CO₂
123 1.0 Fe Ar+8%CO₂
124 1.2 Fe Ar+8%CO₂
126 1.6 Fe Ar+8%CO₂
152 0.9 Fe Metal Ar+18%-25%CO₂
154 1.2 Fe Metal Ar+18%-25%CO₂
164 1.2 Fe Metal CO₂
174 1.2 Fe Rutil Ar+18%-25%CO₂
184 1.2 Fe Rutil CO₂
194 1.2 Fe Basic Ar+18%-25%CO₂