Kemppi MXP 37 Pipe Stee - Manual (Page 26)

EN
6. DISPOSAL OF THE MACHINE
Do not dispose of electrical equipment with normal waste!
In observance of European Directive 2002/96/EC on waste electrical and electronic
equipment, and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and taken to an appropriate
environmentally responsible recycling facility.
The owner of the equipment is obliged to deliver a decommissioned unit to a regional
collection centre, as per the instructions of local authorities or a Kemppi representative. By
applying this European Directive you will improve the environment and human health.
7. ORDERING CODES
FastMig MXP 37 Pipe Steel wire feeder, 300 mm 6103700
FastMig MXP 37 Pipe Stainless wire feeder, 300 mm 6103710
FastMig MXP 38 wire feeder, 300 mm 6103720
Cables
Earth return cable 5 m, 50 mm² 6184511
Earth return cable 5 m, 70 mm² 6184711
MMA welding cable 5 m, 50 mm² 6184501
MMA welding cable 5 m, 70 mm² 6184701
Magnetic clamp (voltage sensing cable) 200 A 9871580
Magnetic clamp (earth return cable) 600 A 9871570
Interconnection cables, air cooled
FASTMIG X 70-1.8-GH 1.8 m 6260468
FASTMIG X 70-5-GH 5 m 6260469
FASTMIG X 70-10-GH 10 m 6260470
FASTMIG X 70-20-GH 20 m 6260471
FASTMIG X 70-30-GH 30 m 6260472
– For other lengths, please contact Kemppi.
Interconnection cables, liquid-cooled
FASTMIG X 70-1.8-WH 1.8 m 6260473
FASTMIG X 70-5-WH 5 m 6260474
FASTMIG X 70-10-WH 10 m 6260475
FASTMIG X 70-20-WH 20 m 6260476
FASTMIG X 70-30-WH 30 m 6260477
– For other lengths, please contact Kemppi.
Software products
MatchLog™ 9991017
MatchChannel™ Included with MatchLog™ licence
FastMig MXP 37 Pipe, MXP 38
24