Kemppi Promig 100 - Manual (Page 3)

Promig 100/0450 – 3 ©
COPYRIGHT KEMPPI OY
X1
X3
X4 X5
X2
b
H11
R1 R2
S1
S2 S3
1. PREFACE
1.1. INTRODUCTION
Congratulations on having purchased this product. Properly installed Kemppi products should
prove to be productive machines requiring maintenance at only regular intervals. This manual
is arranged to give you a good understanding of the equipment and its safe operation. It also
contains maintenance information and technical specifications. Read this manual from front to
back before installing, operating or maintaining the equipment for the first time. For further
information on Kemppi products please contact us or your nearest Kemppi distributor.
The specifications and designs presented in this manual are subject to change without prior
notice.
In this document, for danger to life or injury the following symbol is used:
Read the warning texts carefully and follow the instructions. Please also study the Operation
safety instructions and respect them when installing, operating and servicing the machine.
1.2. PRODUCT INTRODUCTION
Promig 100 is a sub-feeder for demanding use, connectable to the Promig 501, 501L and 530
wire feeder, extending the reach of the air- and liquid-cooled Kemppi Pro gas-shielded arc
welding system up to 50 m.
Use of the Promig 100 demands the mounting of the Prosync 50 synchronizing set to the
Promig 501, 501L and 530 wire feeder.
These operation instructions handle the Promig 100 sub-feeder, assembly and installation of the
MIG system with accessories.
1.2.1. Operation control and connectors
X4 Connection for control cable
Remote control unit
X5 Connection of cable for MMA welding
b
Locking of cooling liquid hoses
H 11 Warning lamp for thermal shield
R1 Wire feed speed control
R2 Welding voltage control
S1 Selection for welding method MMA/MIG
S2 Control mode selection
Local/Remote control
S3 Control mode selection
Gun/Remote control unit
X1 Central connector for intermediate cable
EURO
X2 Connection of welding gun EURO
X3 Connection for control cable