KIP 9900 - Manual (Page 38)

Chapter 2 Basic Operations 2-16
2. 4 Setting Cut Sheet Media to Bypass
Feeder
Cut sheet media can be fed into KIP 9900 from the Bypass Feeder. Orientation, length and
availability of multi-feeding are specified for each media width separately as follows.
Metric size
Width of cut
sheet media Available orientation Available length Availability of multi-
feeding
297mm Landscape only 210mm only Available
420mm Landscape only 297mm only Available
594mm Landscape only 420mm only Available
841mm Portrait & Landscape Not specified (But it must be longer than 440mm.) Not available
Inch size
Width of cut
sheet media Available orientation Available length Availability of multi-
feeding
11” Landscape only 8.5” only Available
12” Landscape only 9” only Available
17” Landscape only 11” only Available
18” Landscape only 12” only Available
22” Landscape only 17” only Available
24” Landscape only 18” only Available
30” Portrait & Landscape Not specified (But it must be longer than 440mm.) Not available
34” Portrait & Landscape Not specified (But it must be longer than 440mm.) Not available
36” Portrait & Landscape Not specified (But it must be longer than 440mm.) Not available
NOTE
(1) Availability of orientation for each media size is illustrated on the Bypass Feeder.
Please follow the illustration when setting the cut sheet media.
Landscape Portrait
Orientation is specified
(2) Multi-feeding is available if the cut sheet media is narrower than A2 (594mm) or 24”.
Refer to [2.4.1 Multi-feeding of cut sheet media] on the next page.