KIP 9900 - Manual (Page 50)

Chapter 2 Basic Operations 2-28
2. 8 User Mode
The KIP 9900 provides 15 User Modes in default.
Name of User
Mode Description User Mode Code
User Mode 1 Test print U1.
User Mode 2 Calendar setting U2.
User Mode 3 Warm Sleep Mode ON / OFF & timer setting U3.
User Mode 4 Cold Sleep Mode timer setting U4.
User Mode 5 Automatic Initial Cut at power on U5.
User Mode 6 Transfer Support LED ON/OFF [Film] U6.
User Mode 7 Alarm ON / OFF U7.
User Mode 8 Choice of Standard / Special Print Mode [Plain paper] U8.
User Mode 9 Choice of Standard / Special Print Mode [Tracing paper] U9.
User Mode A Choice of Standard / Special Print Mode [Film] UA.
User Mode B Selection of Image Enhancement Mode Ub.
User Mode C Reserve UC.
User Mode D Cancel E-26 error Ud.
User Mode E Cancel E-28 error UE.
User Mode A1 Auto Initial Cut: Media A1
User Mode A2 Auto Initial Cut: Length A2
User Mode P contains sub categories of special width selections. If you make prints in a special
width listed below, contact your service personnel for the detail.
Name of
User Mode Description User Mode Code
User Mode P Special width selection available in Metric mode
P1 : Width Selection of 900 / 891 / 880mm P1.
P2 : Width Selection of B1 / 707 / 700mm P2.
P3 : Width Selection of A1 / 620 / 610mm P3.
P4 : Width Selection of A2 / 440mm P4.
[Scroll order of User Mode Codes]
Mode goes back here.
U1
U2
U3
U4
U5
U6
U7
U8
U9
UA
Ub
UC
Ud
UE
A1
A2
P1
P2
They are not displayed in default.
P3
P4