Kreg Jig HD - Manual (Page 2)

www.kregtool.com 800-447-8638
Parts
Drill Guide:
® HD. Generally fi tted with the Stop Block. Also fi ts the Kreg Jig ®
for bench-top production work.
Stop Block:
Ensures proper alignment of the Drill Guide with the end or edge of a board. The Stop Block
can be removed for repair applications.
Kreg Jig ® HD Drill Bit:
This special “step bit” drills a pilot hole and forms a shoulder for the screw head
in one operation.
Face Clamp (not included) :
The Kreg Jig ® HD works with any Kreg Face Clamp ™ . If you don’t already have one, choose
one of our 3”, 6”, or 10” reach models. (See our full line of clamps at www.kregtool.com.) You
also can use a standard C-clamp or F-style clamp.
Kreg Jig ® HD Driver Bit:
Features a #3 square-drive bit that greatly reduces screw-head cam-out.
Kreg Jig ® HD Screws:
A sample 10-pack of screws is included to allow you to practice using your
Kreg Jig ® HD or to get started on your fi rst project.
Stop Collar and Hex Wrench:
The stop collar controls drilling depth. Use the hex wrench to lock the collar into
place on the drill bit.
A
B
C
D
E
F
A
E
F B
C
D