Leprecon LPC Quick Start guide RevF - Manual (Page 15)

15
6. Cues
6.1. Recording cues
LPC can save and play back up to 500 cues. Each cue has independent up and down
fade time, and can have delay and follow times associated, if desired.
The entire Cue Stack can be turned off if LPC is used only for manual and submaster
control.
Open the Cue Record screen to set new Cues.
6.1.1. Cue properties
In the Cue Record screen, properties for the cues to be recorded are shown at the
top of the screen. Stage view below shows channel status, which is the data for cue
recording.
Each cue has these timing properties:
Wait time - Time that can be set to delay the start of the fade after pressing 'GO'
Follow time - Setting Hold Time will start a cue automatically after the previous cue
without another 'Go' press.