Leprecon LPC Quick Start guide RevF User Manual
Page 16
16
Up Fade - Time for the new cue to reach 100%
Down Fade - Time needed for the previous cue to completely fade out.
In addition, each cue can have a chase associated, with a specific rate.
When the cue starts to fade in, the chase will also start.
Cues can be named using the Title field, and this name will appear in the Cue Run
screen.
The link field can be used to set out of sequence playback.
6.1.2. Saving Cues
Set channel levels for a cue using manual faders, video interface, or channel
selection keys.
The stage output will show levels set for the cue. Any previously recorded
submasters can be used to set channel levels as well.
Pressing the 'enter' key or clicking on 'save' will store the Cue. A message will be
displayed confirming that the Cue was saved.
The Cue number will automatically advance to set up the next step