Leprecon LPC Quick Start guide RevF - Manual (Page 4)

4
2. Startup
2.1. Connections
1. Connect monitor to VGA port. LPC has fixed 1024 x 768 resolution.
2. Connect USB keyboard and mouse.
3. If an ELO touch screen is being used, connect USB from touch screen monitor.
4. Connect AC power cord.
5.Turn on power.
2.2. Boot sequence
1. A Linux boot screen will appear, and some text displayed showing the boot progress.
This is normal operation.
2.3. Power -off
To turn off the LPC:
1.Click on the X in the upper right corner of the screen. A dialog box will appear asking
‘are you sure?’
2. Confirm the shutdown dialog box by clicking or touching ‘yes’.
3.After about 30 seconds, turn off the power switch.