Leprecon LP-X24 Manual v3.2 Addendum - Manual (Page 36)

Setup Essentials Chapter Two 35
LP-X24 and LP-X48 Users Manual
Edit Move Delete Resrve
1 #1 Cyberlight 101 Cyberlight
Instrument List
2 #2 Cyberlight 121 Cyberlight
3 Empty
4 Empty
5 Empty
6 Empty
9. To add instruments of a different type, scroll to an empty slot, press Add and repeat
this procedure.
You may also press an ML Select button to jump to a specific slot. The ML Select
button LEDs are lit for slots that are already assigned and unlit for empty ones.
Note: During this procedure, you may also press a ML Select button to save DMX
assignment settings to a specific slot. Pressing the ML Select for an empty slot is the
equivalent of scrolling to the slot and pressing the Save softkey at Step 7
but much
faster. The ML Select LEDs will be lit for slots that are full and unlit for available slots.
To Edit a Moving Light Instrument
Use this procedure if you want to change the name or DMX assignment for an
instrument that you have already added into the system.
1. From the Setup Mode screen, press the Inst softkey.
The Instrument List screen appears.
2. Using the side wheel, scroll to select a moving light instrument for editing or press
the ML Select button for the slot.
Edit Move Delete Resrve
1 #1 Cyberlight 101 Cyberlight
Instrument List
2 #2 Cyberlight 121 Cyberlight
3 Empty
4 Empty
5 Empty
6 Empty
3. Press the Edit softkey.