Leprecon LP-X24 Manual v3.2 Addendum - Manual (Page 50)

Moving Light Programming Chapter Four 49
LP-X24 and LP-X48 Users Manual
Select Instruments
## [THRU ##] (+ -)
3 #1 Studio Color
4 #1 Technobeam
5 #2 Technobeam
6 #3 Technobeam
2 #1 Studio Spot Selected
Deselected
Out of Cue
Out of Cue
Out of Cue
Clear
2. Press the Clear softkey.
The LP-X displays the Clear Instruments screen.
Clear Instruments
## [THRU ##] Enter
3 #1 Studio Color
4 #1 Technobeam
5 #2 Technobeam
6 #3 Technobeam
2 #1 Studio Spot In Cue
In Cue
Out of Cue
Out of Cue
Out of Cue
3. To clear one instrument, enter its number on the numeric keypad and then press the
Enter key on the keypad.
4. To clear a range of instruments, enter the lowest number in the range on the numeric
keypad, press the Thru key, enter the highest number in the range, and then press
the Enter key on the keypad.
Recording Moving Light Looks
You record a look or a series of looks a scene listto a playback. On the LP-X24,
there are six playbacks and twenty pages for each, so you may record up to 120 scene
lists. On the LP-X48, there are twelve playbacks with twenty pages for each, so you may
record up to 240 scene lists.
Overriding Moving Light Looks at Run Time
NOTE: In Video Mode, this has been replaced with Live Override Mode which
operates somewhat differently. Please refer to information on Live Override Mode
beginning on page 26 for details.