Leprecon LP-X24 Manual v3.2 Addendum - Manual (Page 46)

Conventional Light Programming Chapter Three 45
LP-X24 and LP-X48 Users Manual
Manual Scene Fader Bump Buttons
The twelve or twenty-four Manual Scene Faders have Bump buttons. The function of
the Bump buttons is determined by the setting on the Bump Master in the Mode
Controller Section.
When the Bump Master is set to Add, pressing a Bump button automatically adds the
light into the look at 100%.
When the Bump Master is set to Solo, pressing a Bump button automatically kills all
other lights and solos the light at 100%.
When the Bump Master is off, pressing a Bump button has no effect.