Marantz NR1403U - Manual (Page 33)

30
Listening to FM/AM broadcasts
For antenna connections, see “Connecting an FM/AM antenna”
(
vpage 18 ).
How to tune in
The modes for receiving FM broadcasts consists of “Auto” mode
that automatically searches available broadcast stations and “Manual”
mode that lets you tune in using buttons to change the frequency. The
default setting is “Auto”. You can also use “Direct Tune” to tune in by
entering the frequency directly.
In “Auto” mode, you cannot tune in to radio stations if the reception is
not good. If this is the case, then use the “Manual” mode or “Direct
Tune” to tune in.
Listening to FM/AM broadcasts
1
Press FM or AM to switch the
input source.
GTV ScreenH
TUNE+/- OPTION
AUTO
CH+/-
TUNER
CH 1
FM 87.50MHz
Tune Preset Option
GDisplay of this unitH
01 FM 87.50MHz
2
Press TUNE + or TUNE – to select the station you
want to hear.
Scanning is performed until it finds an available radio station.
When it finds a radio station, it stops the scan automatically
and tunes in.
n Adding to the FAVORITES STATION button
You can add up to three types of content.
NOTE
Please note that if you add new content to a number that already
contains content, the older content is deleted.
While content is playing, press and
hold one of the FAVORITE STATION
1 – 3 buttons for more than 3 seconds.
The content is added to the button you
pressed.
Add input sources and radio stations to FAVORITE STATION 1 – 3 .
Playing back content added to the FAVORITES
STATION button
You can easily call up content by pressing the FAVORITE STATION
button.
Press one of the FAVORITE STATION
1 – 3 buttons that you added content
to.
Playback starts.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mations
Basic v
ersion
v See overleaf
DVD