Remote lock function, Remote lock function”) – Marantz NR1403U User Manual
Page 55
52
Panel lock function
n Canceling the Panel lock function
1
Press
X
ON/STANDBY
while you press and hold
DISPLAY
and
M-DAX
with the
unit in standby mode.
2
Press
PRESET CH +
or
PRESET CH –
to select “FP LOCK
z
Off”.
(
z The currently set mode.)
3
Press
STATUS
to enter the setting.
The Panel lock function is canceled.
Even when the Panel lock function is set, you can operate the unit using the remote control unit.
Remote lock function
• When not connecting an IR receiver, disable the Remote lock function. When the function is enabled, you
can not perform operations with the remote control unit.
• By default, this function is disabled.
X ON/STANDBY PRESET CH +
DISPLAY
M-DAX
STATUS
PRESET CH –
n Disabling the sensor function of the remote control unit
1
When the main unit is in standby mode, press
X
ON/STANDBY
while holding
down
DISPLAY
and
M-DAX
on the main unit.
2
Press
PRESET CH +
or
PRESET CH –
to select “RC LOCK On”.
(
z The currently set mode.)
3
Press
STATUS
to enter the setting.
The infrared light receiving function is disabled.
n Enabling the remote sensor function
1
When the main unit is in standby mode, press
X
ON/STANDBY
while holding
down
DISPLAY
and
M-DAX
on the main unit.
2
Press
PRESET CH +
or
PRESET CH –
to select “RC LOCK
z
Off”.
(
z The currently set mode.)
3
Press
STATUS
to enter the setting.
The infrared light receiving function on the main unit is enabled.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mations
Basic v
ersion
DVD