Marantz NR1403U - Manual (Page 68)

65
Video
HDMI Setup
Default settings are underlined.
Make settings for HDMI video/audio output.
Setting items Setting details
Auto Lip Sync
Make automatic
compensation for timing
shift in audio and video
output. On : Compensated.
Off : Not compensated.
HDMI Audio Out
Select HDMI audio output
device. AVR : Play back through speakers connected to the unit.
TV : Play back through TV connected to the unit.
• The audio signal input from the HDMI input connector can be output as
an output signal from the HDMI output connector by setting the HDMI
audio output destination to TV.
Audio signals input via the Analog/Coaxial/Optical input connectors
cannot be output from the HDMI output connector.
• When the HDMI control function is activated, priority is given to the TV
audio setting ( vpage 49 “HDMI control function”).
HDMI Control
You can link operations with
devices connected to HDMI
and compatible with HDMI
Control. On : Use HDMI control function.
Off : Do not use HDMI control function.
• When a device that is not compatible with the HDMI control function is
connected, set “HDMI Control” to “Off”.
• Please consult the operating instructions for each connected device to
check the settings.
• Refer to “HDMI control function” ( vpage 49 ) for more information
about the HDMI control function.
NOTE
• When “HDMI Control” is set to “On”, it consumes more standby
power. If you are not using this unit for an extended period, it is
recommended that you unplug the power cord from the power outlet.
• The HDMI control function controls operations of a TV that is compatible
with the HDMI control function. Make sure that the TV and HDMI are
connected when you perform HDMI control.
• If the “HDMI Control” settings have been changed, always reset the
power to connected devices after the change.
Setting items Setting details
Standby Source
Sets the HDMI input source
to put into standby when
the power is on. Last : Enters standby with the previously used input source.
CBL/SAT / DVD / Blu-ray / GAME / MEDIA PLAYER / AUX : Enters
standby with each of the input sources assigned to each input terminal.
“Standby Source” can be set when “HDMI Control” is set to “On”.
P.Off Control
Links the power standby of
this unit to external devices. All : If power to a connected TV is turned off independently of the input
source, power to this unit is automatically set to standby.
Video : If power to a connected TV is turned off when the input source is
CBL/SAT, DVD, Blu-ray, GAME, MEDIA PLAYER, AUX, power to this unit
is automatically set to standby.
Off : This unit does not link with power to a TV.
“P.Off Control” can be set when “HDMI Control” is set to “On”.
Volume Display
Default settings are underlined.
Sets where to display the master volume level.
Setting items Setting details
Volume Bottom : Display at the bottom.
Top : Display at the top.
Off : Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to “Top”.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mations
A
dv
anced v
ersion
DVD