Marantz NR1403U - Manual (Page 57)

54
Menu map
For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
How to make detailed settings
Setting items Detailed items Description Page
Audio
Surr.Parameter Adjusts surround sound parameters. 59
Tone Adjusts the tonal quality of the sound. 60
Dialogue Level Sets the output level to clarify the dialogue
output from the center channel. 60
Subwoofer Level Sets the subwoofer on/off and its output level. 60
M-DAX Expands the low and high frequency components
of compressed audio to enable richer audio
playback. 60
Audio Delay Compensates for incorrect timing between video
and audio. 61
Volume Set the volume setting. 61
Audyssey Makes Audyssey MultEQ®, Audyssey Dynamic
EQ® and Audyssey Dynamic Volume® settings. 61
Manual EQ Uses the graphic equalizer to adjust the tone of
each speaker. 63
Video
HDMI Setup Makes settings for HDMI video/audio output. 65
Volume Display Sets where to display the master volume level. 65
Info.Display Displays status of operation temporarily when
the sound mode is changed or input source is
switched. You can set whether or not to show
each of these status displays. 66
Audio Display Sets how long each menu is displayed when the
input source is “TUNER”. 66
TV Format Set the video signal format to be output for the
TV you are using. 66
Inputs
Digital Assign Changes input connector assignment. 68
Source Rename Changes the display name for this source. 69
Hide Source Remove from the display input sources that are
not used. 69
Source Level Adjusts the playback level of the audio input. 69
Input Select Sets the audio input mode and decode mode. 69
Video Source Video of another input source is played back
combined with the playing audio. 70
Setting items Detailed items Description Page
Speakers
Audyssey® Setup The acoustic characteristics of the connected
speakers and listening room are measured and
the optimum settings are made automatically. 21
Manual Setup Perform when setting the speakers manually
or when changing settings made in Audyssey®
Setup. 72
General
Language Sets the language for display the menu on the
TV screen. 76
Auto Standby When you do not perform any operation on this
unit with no audio or video input for a specified
time, this unit automatically enters the standby
mode. Before it enters the standby mode, “Auto
Standby” is displayed on the display of this unit
and the menu screen. 76
Front Display Set the display on/off setting. 76
Information Show information about receiver settings, input
signals, etc. 77
Setup Lock Protect settings from inadvertent change. 77
Setup
Assistant
Perform the installation, connection, and setup procedures to prepare the
unit for operation following guidance. C 7
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mations
A
dv
anced v
ersion
DVD