Marantz NR1504 - Manual (Page 101)

98
Audio
Manual EQ
Default settings are underlined.
Use the 9 band graphic equalizer to adjust the tone of each speaker.
“Manual EQ” can be set when “MultEQ®” setting ( vpage 97 ) is “Manual EQ”.
Setting items Setting details
Speaker Select.
Select whether to adjust
tones for individual speakers
or for all speakers.
All : Adjust the tone of all speakers together.
Left/Right : Adjust the tone of left and right speakers together.
Each : Adjust the tone of each speaker.
Adjust EQ
Adjust tonal balance for
each frequency band. Adjust
the speaker selected in
“Speaker Select.”.
q Select the speaker.
• Select the speakers you want to adjust when “Left/Right” or “Each”
is selected.
w Select the adjustment frequency band.
63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
e Adjust the level.
–20.0dB – +6.0dB (0.0dB)
Curve Copy
Copy “Audyssey Flat”
( vpage 97 ) curve from
MultEQ®.
Yes : Copy.
No : Do not copy.
• “Curve Copy” is displayed after Audyssey® Setup has been performed.
• When you select “Curve Copy” and press ENTER , the “Copy “Audyssey
Flat”?” prompt is displayed. Select either “Yes” or “No”, and press
ENTER .
Set Defaults
The “Manual EQ” settings
are returned to the default
settings.
Reset : Reset to the defaults.
Cancel : Do not reset to the defaults.
When you select “Set Defaults” and press
ENTER , the “Reset to the default values?”
prompt is displayed. Select either “Reset” or
“Cancel”, and press ENTER .
Basic instructions
Advanced instructions
Information
Advanced instructions
DVD