Marantz SR7005 - Manual (Page 54)

50
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
This section provides the installation, connection,
and setup methods of speaker systems other
than the 7.1-channel system (with surround back
speakers).
For the speaker installation, connection, and setup
methods of the 7.1-channel system with surround
back speakers, see “Simple version (Simple setup
guide)” (vpage 4).
Use Audyssey® Auto Setup function of this unit
to automatically detect the number of connected
speakers and perform optimal settings for the
speakers to be used.
Procedure for speaker settings
Install
Connect (vpage 51)
Set up speakers (vpage 54)
Install
This unit is compatible with Audyssey DSX™ (vpage 111) and
Dolby Pro Logic gz (vpage 112), which offers an even wider and
deeper surround sensation.
When using Audyssey DSX, install front wide speakers or front
height speakers.
When using Dolby Pro Logic gz, install front height speakers.
Install the surround back speakers in a position 2 to 3 ft (60 to 90 cm)
higher than ear level.
z 1
z 2
45˚
Surround
speaker
2 – 3 ft /
60 – 90 cm
G Viewed from the sideH
Front height
speaker
• Point slightly
downwards
At least
3.3 ft / 1 m
Surround back
speaker
• Point slightly
downwards
Front
speaker
Front wide
speaker
z 1 Recommended for Dolby Pro Logic gz
z 2 Recommended for Audyssey DSX
NOTE
Sound is not output simultaneously from the surround back speakers,
front height speakers, and front wide speakers. You can switch
between speakers by changing the settings in surround mode or
Audyssey DSX.
When 7.1ch (Surround back / Front height / Front
wide speaker) installed
FHR FHL
FL FR
SL SR
FWL FWR
SW
C
SBL SBR
z1
z2
z3
z
5 z
4
Listening
position
z 1 22˚ – 30˚ z 2 22˚ – 45˚ z 3 55˚ – 60˚
z 4 90˚ – 110˚ z 5 135˚ – 150˚
When 6.1ch (Surround back speaker) installed
FL FR
C
SB
SL SR
SW
z 1
z 2
Listening position
z 1 22˚ – 30˚ z 2 90˚ – 110˚
Speaker installation/connection (Advanced connection)