Marantz NR1601 - Manual (Page 32)

26
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
TP (Traffic Program)
TP identifies programs that carry traffic announcements.
This allows you to easily find out the latest traffic conditions in your
area before leaving home.
n TP search
Use this function to find RDS stations broadcasting traffic programs
(TP stations).
1
Press TUNE twice to switch the
input source to “TUNER”.
2
Press SEARCH/INFO to select
“TP SEARCH”.
TP-Traffic Information
FM105.50MHz PS Name
CH A1
[CH+-]:Search
[SRCH]:RT
3
Press PRESET + or PRESET – .
TP search begins automatically.
• If no TP station is found with the above operation, all the reception
bands are searched.
• The station name is displayed on the display after searching stops.
• If no other TP station is found when all the frequencies have been
searched, “NO PROGRAMME” is displayed.
Tuning in radio stations
RT (Radio Text)
RT allows RDS stations to send text messages that appear on the
display.
“RT” appears on the display when radio text data is received.
1
Press TUNE twice to switch the
input source to “TUNER”.
2
Press SEARCH/INFO to select
“RT”.
RT-Radio Text
CH A1
FM105.50MHz PS Name
Radio Text
[SRCH]:Exit
: ON
• While receiving an RDS broadcast station, the text data broadcast
from the station is displayed.
• To turn the display off, press o p .
• If no text data is being broadcast, “NO TEXT DATA” is displayed.
n Tuner (FM/AM) operation
Operation buttons Function
PRESET +, – Preset channel selection
uio p Cursor operation
ENTER Enter
SEARCH
Direct frequency tuning /
RDS search
BAND FM/AM switching
T.MODE Switch search modes
TUNING +, – Tuning (up/down)
0 – 9
Preset channel selection (1 – 8) /
Direct frequency tuning (0 – 9)
SHIFT Preset channel block selection
MEMORY Preset memory registration
TV POWER
TV power on/standby
(Default : Marantz)
TV INPUT
Switch TV input
(Default : Marantz)
Switching the tuning increment
The tuning increment factory settings are 9kHz for AM, and 0.05
MHz for FM.
MENU
BAND ON/STANDBY
MENU
1 While pressing down BAND and MENU , press ON/
STANDBY to turn on the power.
“Step 0 AM9/FM50 1 ” appears on the display.
2
Press o p .
“Step 0 AM10/FM200 1 ” appears on the display, and the
tuning increment is switched to AM and FM are 10 kHz and
0.2 MHz.
3
Press ON/STANDBY .
• The tuner preset memory will be cleared if this operation is
performed.
• This setting will not revert to the default values even when the
microprocessor is reset.