Marantz NR1601 - Manual (Page 52)

46
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Surround Parameter
Default settings are underlined.
Adjust surround sound parameters. It may not be possible to set this item depending on the input signal.
Setting items Setting details
HT-EQ
Soften the treble range
of movie soundtracks for
better understanding. ON : “HT-EQ” is used.
OFF : “HT-EQ” is not used.
This can also be set by pressing HT-EQ on the
remote control unit.
D.Comp
Compress dynamic range
(difference between loud
and soft sounds). Low / Mid / High : These set the compression level.
OFF : Turn dynamic range compression off.
DRC
Compress dynamic range
(difference between loud
and soft sounds). Auto : Automatic dynamic range compression on/off control according to
the source. This can be set in the Dolby TrueHD mode.
Low / Mid / High : These set the compression level.
OFF : Dynamic range compression is always off.
LFE
Adjust the low-frequency
effects level (LFE). –10dB – 0dB
For proper playback of the different sources, we recommend setting
to the values below.
• Dolby Digital sources : “0dB”
• DTS movie sources : “0dB”
• DTS music sources : “–10dB”
Center Image
Assign center channel
signal to front left and right
channels for wider sound. 0.0 – 1.0 (0.3)
“Center Image” is displayed when the surround mode is set to “DTS
NEO:6 Music”.
Panorama
Assign front L/R signal also
to surround channels for
wider sound. ON : Set.
OFF : Do not set.
“Panorama” is displayed when the surround mode is set to “PLgx
Music” or “PLg Music”.
Dimension
Shift sound image center
to front or rear to adjust
playback balance. 0 – 6 (3)
“Dimension” is displayed when the surround mode is set to “PLgx
Music” or “PLg Music”.
Center Width
Assign center channel
signal to front left and right
channels for wider sound. 0 – 7 (3)
“Center Width” is displayed when the surround mode is set to “PLgx
Music” or “PLg Music”.
Audio Adjust
The sound being played in the surround mode can be adjusted to your liking.
The items (parameters) that can be adjusted depend on the signal being input and the currently
set surround mode. For details on the adjustable parameters, see “Surround modes and surround
parameters” (vpage 67).
Menu operation
1
Press AMP to set the remote control unit to amplifier operation
mode.
2
Press MENU .
The menu is displayed on the TV screen.
3
Press ui to select the menu to be set or operated.
4
Press ENTER to enter the setting.
• To return to the previous item, press RETURN .
• Exiting the Menu, press MENU while the menu is displayed.
The menu display disappears.
Items that can be set with the Audio Adjust procedure
Surround Parameter (vpage 46)
Tone (vpage 47)
Audyssey Settings (vpage 47)
Manual EQ (vpage 49)
M-DAX (vpage 49)
Audio Delay (vpage 49)
Remote control operation
buttons
Move the cursor
(Up/Down/Left/Right)
Confirm the setting Return to previous menu