Setting the back light – Marantz NR1601 User Manual

Page 66

Advertising
background image

60

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

SVENSKA

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

SVENSKA

Operating learn mode

Erasing the all sources

1

Press and hold down

SET

and

SOURCE SEL

until the LEARN

indicator blinks.

2

Press and hold down

D.MODE

and press

ON

and

STANDBY

.

LEARN indicator lights.

3

Press

ENTER

to continue erasing.

• The SEND indicator blinks twice and

the mode returns to LEARN mode.

• To cancel the erasing operation, do

not press

ENTER

and simply press any

other button.

4

To return the normal mode, press

SET

.

NOTE

Erasing codes will return to the factory preset code, or there will leave
empty if the button has no factory preset code.

Setting the back light

Press the Light button on the side of the remote control, and the
buttons on the remote control light for 2 seconds. If the Light button
is pressed while the buttons are lit, the buttons remain lit for another
2 seconds.
• Backlight is set on in the factory settings.

n

Disabling the backlight

Press and hold both

SET

and

STANDBY

until the SEND indicator

flashes twice.

n

Turning the backlight on

Press and hold both

SET

and

ON

until the SEND indicator flashes

twice.

Advertising