Marantz UD9004 - Manual (Page 34)

Troubl
eshooting
Information
HDMI
Control
Function
Pl
ayback
Connections
Getting Started
Specifications
30
ENGLISH
Audio Setup
Setting items Setting contents
XLR
Set the signal to be output
from the XLR terminal. G Terminal PolarityH : Set the polarity of the XLR terminal.
Normal • : Normal polarity.
Inversion : • Reverse the polarity.
G Gain UpH : Can increase output gain when the input sensitivity of a
device connected via XLR is low.
Off • : Outputs at standard gain from the XLR terminal.
On : • Increase the output gain of the XLR terminal. Set when the input
sensitity of the connected device is low.
The default UD9004 balance model XLR audio connectors pin alignment
is as shown.
q GROUND w HOT e COLD
Setting items Setting contents
User Preset 1/
User Preset 2
This sets the operating
mode for “User Preset 1” or
“User Preset 2” selected by
PURE DIRECT
button.
Setting each of these items
to “Off” enables output of
high quality analog signals
free of interference from the
associated circuits.
G Digital OutH : Set whether to output signals to the digital audio output
terminal.
On • : Enable digital audio output.
Off : • Disable digital audio output.
G Video OutH : Set option of video output.
On • : Enable video output.
Off : • Disable video output. This setting also disables audio output from
the HDMI terminal.
G DisplayH : Set option for front panel display.
On • : Turn on display.
Off : • Turn off display.
For more information, see “Playing Back High-quality Audio (Pure Direct
Function)” (vpage 40).
Makes settings regarding digital audio and video output modes during Pure Direct mode,
as well as display messages. Two types of setting can be registered.
Pure Direct Setup
Default settings are underlined.
Setup
Remote control operation
buttons
SET UP :
Displaying the menu
Cancel the menu
d f 0 1 :
Moves the cursor
(Up/Down/Left/Right)
ENTER :Decision the setting RETURN :Return to previous menu