Marantz NA6005 - Manual (Page 105)

o No sound comes out
Symptom Cause / Solution Page
No sound is produced. Or
sound is distorted.
0
Check the connections for all devices. 20
0
Insert connection cables all the way in. －
0
Check that input connectors and output connectors are not reversely connected. －
0
Check cables for damage. －
0
Check the amplifier’s functions and controls and adjust as necessary. －
o Sound is interrupted or noise occurs
Symptom Cause / Solution Page
During playback from the
Internet radio or USB
memory device, sound is
occasionally interrupted.
0
When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted. －
0
The network communication speed is slow or the radio station is busy. －
When making a call on
iPhone, noise occurs in
audio output on this unit.
0
When making a call, keep a distance of 20 cm or longer between iPhone and this unit. －
Sound cuts out when using
Wi-Fi connection.
0
If nearby devices cause playback to cut out due to electronic interference, switch to a wired LAN
connection.
94
0
Particularly when you play back large music files, depending on your wireless LAN environment, the
playback sound may be interrupted. In this case, make the wired LAN connection.
94
Noise often occurs in
FM/AM broadcasting.
0
Change the antenna orientation or position. 26
0
Use an outdoor antenna. 26
0
Separate the AM loop antenna from the unit. 26
0
Separate the antenna from other connection cables. 26
Contents Connections Playback Settings Tips Appendix
105
Front panel Rear panel
Remote control
unit
Index