Marantz NA6005 - Manual (Page 59)

Playing a Bluetooth device
Check the following before you play back music.
0
The Bluetooth function of the Bluetooth device must be turned on
0
Pairing must be completed
1
Press Bluetooth to switch the input source to
“Bluetooth”.
The unit will automatically connect to the most recently used
Bluetooth device.
2
Start playing the Bluetooth device.
0
The Bluetooth device can also be operated with the remote
control of this unit.
Operation buttons Function
1/3 Playback / Pause
2 Stop
8 9 Skip to previous track / Skip to next track
6 7 (Press and hold) Fast-reverse / Fast-forward
0 When the power of this unit is turned on, the input source will be automatically
switched to “Bluetooth” if a Bluetooth device is connected.
0 When the “Network Control” setting of this unit is set to “On” and a Bluetooth
device is connected with the unit in the standby state, the power of the unit will be
turned on automatically.
0 Press INFO on this unit during playback to switch the display between Title name,
Artist name, Album name, etc.
0 English letters, numbers and certain symbols are displayed. Incompatible
characters are displayed as “.” (period).
NOTE
0 To operate the Bluetooth device with the remote control of this unit, the Bluetooth
device needs to support the AVRCP profile.
0 The remote control of this unit is not guaranteed to work with all Bluetooth devices.
0 Depending on the type of Bluetooth device, this unit outputs audio that is coupled
to the volume setting on the Bluetooth device.
Contents Connections Playback Settings Tips Appendix
59
Front panel Rear panel
Remote control
unit
Index